Zhejiang Guoji Fluid Control Co., LTD

Full set of industrial valve solutions, high temperature and high pressure power station valve, hard seal ball valve butterfly valve, hydraulic control valve, knife gate valve, blind valve

J941W, J941H electric stainless steel globe valve

J941W, J941H electric stainless steel stop valve is composed of two parts: electric actuator and stop valve. The opening and closing part is a plug shaped valve disc, the sealing surface is plane or cone, and the valve disc moves in a straight line along the center line of the fluid. The movement of the valve stem has a lifting rod type (the valve stem is lifted, the handwheel is not lifted), and a lifting rotary rod type (the handwheel is rotated with the valve stem, and the nut is located on the valve body). It can be applied to various pressure, temperature and medium conditions. The valve is mainly used to cut off, distribute and change the flow direction of the medium in the pipeline, and generally does not adjust the use, because the unbalanced force is too large when adjusting, and the erosion of the valve core is more severe.

 

J941W, J941H Electric stainless steel globe valve features:

1. Simple structure, convenient manufacturing and maintenance.
2, the valve stem after tempering and surface nitriding treatment, has good corrosion resistance and abrasion resistance.
3, suitable for use as an automatic cutting medium.
4, good sealing, small friction between the sealing surface, long life.
5, the valve stem opening or closing stroke is relatively short, and has a very reliable cutting action.
6, the seat and disc are relatively easy to repair or replace the sealing element without removing the entire valve from the line.
7, the reverse seal is made of threaded sealing seat or body surfacing welding austenitic stainless steel, reliable sealing, replacement filler can be carried out without stopping, convenient and fast, does not affect the operation of the system.
8, the electric actuator is easy to operate.

J941W, J941H Electric stainless steel globe Valve Ordering instructions:

1. When the user has determined the type and model of the valve (especially the non-standard model), the user should correctly explain the meaning and requirements of its model.

2. The user shall place an order according to the product model listed in the sample. If there are any special requirements for the product item, please specify in the order:

1) Structural length 2) flange standard 3) Valve structure form: such as full diameter or reduced diameter of the channel, body cover connection form 4) valve internals and other requirements for materials 5) pressure test, inspection standards, marking and other requirements

3, when the use of the valve is very important or the environment is more complex, please try to provide design drawings and detailed parameters, by our experts for your review

4. The company can configure electric device, pneumatic drive device, turbine device according to the specific requirements of users.

5. All kinds of valves produced by the company can meet the requirements of the order, and the products are strictly inspected and tested according to the required relevant standards before leaving the factory.